2 Crafty 4 My Skirt: Pallet

Monday, May 20, 2013

How To Make Pallet Bookshelves

I am sure you have seen Pallet bookshelves around the internet.

I made some for the boutique last month and I wanted to show you how I did it.

Grab a pallet.

I used the Circular Saw. I just used the board as a guide and cut right up the side of it.

My saw blade was not big enough to go all the way through.

So I flipped the pallet over and tried to just match up my line.
Well... You can see how well that went!

For the next cut I just got out the Sawzall to cut the rest of the way through. That worked GREAT!

I took some unfinished to the boutique and some painted. To paint them I primed them with Kilz Primer. The best primer ever. I brushed it on. And it took FOREVER! My sister-in-law Kortnie from Ioka Lane Boutique uses it in the Spray Can and told me I should try that! I definately will next time!

*If you chose to brush it on, make sure you have some paint thinner around because it is oil-based.

I left the bottom off for painting so that I could get up inside easier.

I just laid out all of my bottom pieces and painted them.

I atttached the bottom pieces with a Framing Nailer. And it was done!

One of these days I hope to get one of these hung in my own home!

These pallet bookshelves are available for sale in my shop!

Here is what I made with what was left over from the pallets after making the bookshelves.

View the tutorial here!

Never miss a new post!

Subscribe to 2 Crafty 4 My Skirt by Email

Check out 2 Crafty 4 My Skirt on Facebook for items that you can custom order INCLUDING THIS ONE or just to stay updated on new projects!

This Post is Sponsored by: Alese Stewart Photography, Reclaim-ologist and Other Crafty Chicks, Shabby Apple Dresses, My Own Labels, mymemories.com, LittleTikes.com, Little Giant Ladders, Leonisa

Linking to: Tip Junkie, Savy Southern Style Between Naps on the Porch, and these other awesome link parties.

Monday, April 15, 2013

How To Make A Pallet Clock

This has been on the "TO DO LIST in my head" for quite sometime now! I am so excited to have finally finished it!

When I made the potting table out of pallets for my mother-in-law, I used an old pallet and it took some effort to take apart, but not near as much effort as these ones. After I pulled off the first couple boards, I decided that it would be fine if I lost an inch or a little more off each end. So I got out the circular saw and just cut them off at the end to save 2/3 of the nails I had to pull out.

It was still A LOT of effort but I had a good helper ;)

After I cut the sides off. I just wiggled them back and forth as much as I could to loosen them, and then I used the pry bar to take them off.

After I got all of my boards pulled off, I laid them all next to each other. I used two pallets and they were a little different so I put them every other one so that the similar boards were not right next to each other. Then I found my center and marked it with an "x".

I put a pin in my "x", tied a piece of yarn to it and a pencil on the other end. I used that to draw my circle.

Then my willing assistant (aka my husband who gets dragged into all my projects like it or not) helped me cut each board with the scroll saw. He has much more steady hands then me.

We laid out all the boards and used a 1x2 board to put them together.

I just used a finish nailer to put the 1x2 on.

I drilled the hole for the clock at the "x" I had already marked in thr center.

The clock that I had was for a 1/4" face and my pallet boards were 3/4" thick.

For my birthday my husband gave me a router. You know you are truly "2 Crafty 4 Your Skirt" when you are excited if your husband gives you tools for your birthday! This was the first time we got to use it! And it worked GREAT!

I traced my clock mechanism on the back, and then we cut it down to the depth we needed. We did it on a test piece of wood first to make sure we had it set at the right depth. We used a plunge bit for this.

I used the sander to sand down the face and the edges.

I spray painted it with Rustoleum Heirloom White. I wanted the boards to kind of show through so I didn't prime it. And it took two coats to get the color I wanted.

I cut my stencils out with the Cricut like I have lately for my signs.

I used acrylic paint. I started with the 3,6,9, and 12.

I was worried that the numbers in-between wouldn't fit so I traced my stencils onto paper to see. They fit but were very tight. I emailed my crafty sister-in-law to get her opinion. Should I squish the numbers in? Do them in a smaller font? Or just do dots for them?

She said dots. So that's what I did! The next one I make I am just going to use smaller numbers all they way around, but I kind of like it like this too. I used an "i" in one of my other signs, so I just used the dot from that stencil.